If you had edges and detail on your piece youd want to go soft so you dont cut through to the stain. –Applying Second Coat of Gel Topcoat.
It states to use a cloth but instead of a cloth she used a brush because the cloth was too messy and made it harder to apply the stain evenly.
Java gel stain instructions. These varieties tend to absorb thin traditional stains unevenly looking messy and unfinished no. Using the flat part of a dry bristle brush angled a bit brush across and feather out in the direction of the grain pattern. Apply the gel stain liberally with either a cotton cloth natural bristle brush or a poly foam brush.
The idea behind a gel stain is to spread it onto the wood in a thick layer for a few minutes and then wipe it off with a clean cloth. Brush stain on by using the stain sparingly and basically dry brushing it on evening it as you go. Use long slow strokes when applying stain or polyurethane and you will get the best coverage with the least amount of streaking.
Additional coats will darken the initial coat. Think of it like spreading butter on a piece of toast. Select the gel stain top coat of your choice.
Apply stain with a natural bristle brush or foam brush. Use a paint brush to apply a layer of gel stain. This product brought back to life some old furniture.
If you used water-based stain go for a water-based top coat. Choose a top coat that matches the base of your stain if you used an oil-based gel stain use an oil-based top coat. Gel stain is particularly forgiving with splotch-prone woods like birch cherry maple and pine.
First sand down the surface with a 220 sanding pad. Be sure you dont wipe too hard to remove all the stain you just applied. Wait 48 hours before applying the next coat.
I applied the gel stain with small disposable foam brushes and applied three coats waiting for each coat to dry several hours in between coats to make sure all the honey oak was covered. The technique is to wipe it on but dont try to rub it in or wipe it off. This is my favorite way to use a gel stain.
Apply gel stain liberally and wipe off excess stain with a cloth or high quality paper towels. Brush stain on heavily with bristle or foam brush and then remove excess stain. Let the stain dry 72 hours in ideal conditions.
I refinish Furniture and I make Picture frames and I needed a dark finish. I waited 24 hrs then sanded 220 grit very lightly to remove any raised grain or dried dust particles wiped it down with a slightly damp rag before re-coating. It took me 5 days to complete my project.
After two coats 24hrs apart and 24 hrs of dry time the backs were dry but the sides were still tacky. Java Gel Stain by General. Be sure to test a small area of your project to make sure it is the finish you want and that the application method youve chosen is working well for you Wipe off the gel stain going with the grain using a clean dry cotton cloth or high quality paper towels.
820 – 1140 Here is the table leaf with one coat of gel satin that has dried. When the brush becomes full wipe off excess on rags. Knock down the finish staying with the grain.
3 coats java 2 coats polyurethane sand as above for the polyurethane. Scoop up a good glob of Gel Stain about a heaping tablespoon and start to spread it around. THIS ONE IS THE MOST General finishes Java Gel Stain FAQs.
Wipe with the grain blending any adjoining areas. The top coat seals the gel stain and protects the finish of your piece. OUR WATER-BASED THIN GEL STAIN HYBRIDS VERSATILE HYBRID TECHNOLOGY New Nano-technology makes this the most Versatile gel stain glaze on the market GEL STAIN – This thin gel stain rides over an existing finish just like a typical gel stain WOOD STAIN – Thin enough to absorb into unfinished wood like a tradit.
Wipe off the dust. L-based products increase the dry time. Feather out uneven areas and pull excess stain from corners using a bristle brush.
Work on one section at a time. Make sure you get in all the cracks and crevices. Apply liberally gently wipe away the excess.
You dont want to wipe in the same way you wipe traditional stain If you want more color apply more coats with the same process waiting about 24 hours in between. Let oil-based products dry 72hrs Oil over water. Gel Stain Furniture Furniture Design Painted Furniture Water Based Wood Stain Java Gel Stains Easy Wood Projects Project Ideas General Finishes Distressed Painting.
How to use Gel Stain to refresh wood furniture without strippingFor more details on using Gel stain read the blog post. Apply OnWipe Off Method. I now can make my picture frames and cabinets as dark as my customers want them.
The next day we gave them a light sanding cleaned the dust off and started with the back and sides using General Finishes Java Gel Stain. Discharge accumulated stain from the brush onto a paper towel soaked with mineral spirits as you work. There are two methods for using gel stain over existing finishes.
Wiping will allow you to control the evenness and depth of color being applied as the more you wipe away the lighter the color level of the stain. Again depending on the time of year you may not need to wait as long.